If you’re looking for a way to keep your gutters clean and debris-free, you may be considering installing gutter guards.
There are many types of gutter guards available on the market, so it can be challenging to decide which one is right for you.
This blog post will discuss the different types of gutter guards available in the UK and their pros and cons.
What a Gutter Guard Is
A gutter guard is a device installed on top of your roof gutters to prevent leaves, twigs, and other debris from entering the gutters and clogging them.
This can be a crucial step in protecting your home from water damage, as clogged gutters can lead to water spilling over the edge of the gutters and seeping into your home.
There are several different types of gutter guards available in the UK, each with its own set of pros and cons. The 5 most common types are below:
- Reverse Curve
1. Screen Gutter Guards
Screen gutter guards are an affordable and straightforward way to clean your gutters.
They come in two different forms, either wire or plastic grids that block leaves from entering into the trough of their roofs rainwater channels while allowing water drainage through without clogging it up with dirt & debris.
The best part about these devices? You can install them yourself!
Gutter screens are susceptible to being knocked out or dislodged by high winds.
They can also come loose because prying up your lower row of shingles will remove them as well, which means that if you install slip-under gutter guards, they won’t be covered under warranty anymore!
So before taking this step, make sure all the pros outweigh any cons for yourself.
Additionally, prying up the lower row of roof shingles on your house might compromise its warranty if you install slip-under gutter guards without contacting an expert first!
When it comes to protecting your home from rain, there’s a perfect solution, no matter how big or small the area.
Micro-mesh gutter guards will allow the water to run through small holes while blocking twigs and debris, but they require one of three simple installation methods: slipping their edge under rows on the top shingle; snapping them directly onto roofs as well at any angle where you want protection covered (such curves exist), Or simply attaching flanges which can be done quickly by anyone regardless if they have experience doing these types tasks before!
Micro-mesh gutter guards are great for blocking even small bits of debris, such as blowing sand.
These mesh holes allow rainwater to flow through but keep out ultrafine particles that can clog up your gutters and cause unnecessary damage over time!
You may need to clean them occasionally using a hose sprayer or scrub brush; make sure you do so before any big storms come along since this task won’t be easy with all those tiny pieces stuck on there already waiting patiently at first sight after appearance.
3. Reverse Curve Gutter Guards
A reverse-curve gutter guard’s lightweight metal or moulded plastic is designed to keep water flowing over the top and around a downward curve before dropping down into your gutters.
It prevents leaves from clogging up these channels, even in yards with numerous trees!
These guards are more expensive than mesh or screen options, but they have many benefits.
Though they are less DIY-friendly, they can be a great choice if you know what to look for!
These types of protection install above your existing gutters so the colour matches with other components in place, or else water must run down outside rather than staying inside where it’s supposed to go (and causing flooding).
4. Brush Style Gutter Guards
Brush style gutter guards are an affordable and easy way to keep your gutters clean.
They are designed to prevent large debris from falling into the gutters and causing clogs. They’re easy installation affordable price makes them popular among DIYers on a budget!
They’re made of durable plastic, so they’ll last for years without needing replacement or repairs!
The Brush style guard features thick metal wire cores with polypropylene bristles extending outwards at the centre; this means it requires no screws needed installation- bend them around corners if necessary while being flexible enough not only to withstand storms but last longer than most other types as well thanks to its durable material makeup (polyester + aluminium).
To install one, simply cut it lengthwise and then slide inside the funnel-like opening at the bottom front edge on each side (the same direction as flow).
There’s no need to waste time trying not to get messy – do this task quickly while wearing gloves if desired because dirt gets stuck easily under fingernails which could cause allergies when mixed with water vapour during rainstorms.
5. Foam Gutter Guards
You can also use foam to guard your gutters. It’s an easy-to-use option that will take the form of a triangular block, which sits in place and prevents debris from entering through its flat sides while allowing water to flow through the drainage system with little fuss!
These gutter guards are an excellent choice for those who want an easy and affordable way to protect their gutters. They come with foam that can cut, which means there’s less risk of damage or leaks.
Be aware when installing them in locations where heavy rain could cause overflow issues from the downspouts.
While there are a few different types of gutter guards on the UK market, not all of them are created equal.
If you’re in the market for some new gutter protection, it’s essential to do your research and find the right product for your home.
We hope this article has helped you narrow down your choices and given you a better understanding of what each type of guard can offer. Thanks for reading!
Last Updated on January 1, 2023