Last Updated on March 20, 2024 by Sharaj
A belt and disc sander is a 2-in-1 flexible power tool for effective sanding. The disc part of the machine helps with flawless execution of precise edge works such as trueing outside curves and fitting mitre joints.
The belt sander is perfect for flattening faces as well as edges, shaping contours, and flushing inside curves.
If you want to get an ideal belt and disc sander UK for your workshop, you should not rely on brand popularity alone. You should consider other vital factors such as motor power, dust collection, speed of the belt/disc, and so on.
Check out our analysis and comparison of top machines in the market right now.
Top 9 Belt and Disc Sander Reviews
Here are our 9 belt & disc sander to buy in the UK. Let’s check our top reviews below:
1. Silverline 972660 350W Bench Belt and Disc Sander
Features
- Dual-position, multi-angle, 390 x 125 mm table with mitre guide
- Belt sander surface can be tilted 0 - 90°
- Long-life induction motor with sealed bearings
- 390 mm length belt sander and 150 mm dia disc sander
- Includes 80-grit belt, 80-grit sanding disc, multi-angle table and mitre guide
If you crave for the best bench belt sander UK, check out the Silverstorm belt and disc sander. This machine boasts of a 35-Watt induction motor with sealed bearings, and that is why you can rely on its maximum performance.
You will like its dual-position multi-angle table, which comes with a mitre guide. The table measures 390 by 125 millimetres, making it possible for you to get the most satisfactory outcome. You can tilt the surface of the belt sander up to 90 degrees so as to boost performance.
With the belt length standing at 390 millimetres while the disc has a diameter of 150 millimetres, you can be sure of covering more area in good time. This bench-mounted belt sander has double dust extraction ports so that your work area can be clean and tidy.
What’s more, its switch is properly sealed so as to serve as a protection against dust. The disc has a no-load speed of 1450 revolutions per minute while the speed of the belt is 5 metres per second. That is why it is perfect for general sanding of different materials like wood, metal, and plastic.
Features
- Thanks to the adjustable sanding belt position, it is flexible to use
- Thanks to the adjustable, multifunctional workbench, you can work comfortably and precisely
- The rubber feet offer good stability
- Dust-free switch for extra-long life span
- 2 angle vacuum cleaner connections that can be connected without any problems
Are you searching for top bench sanders UK? We recommend this product from Ferm. It has a motor capacity of 350 Watts, and that is why no one can contend with its optimum performance. Its disc measures 150 millimetres, hence, you can sand small workpieces as well as details without much hassle.
Also, the sanding belt position of this benchtop belt sander is adjustable, meaning that you will be more flexible during operations. Its worktable is multifunctional and adjustable so that you can be more comfortable when working. Its rubber feet help in providing maximum stability so that you will be able to get the best result.
Besides, it comes with a dust protective safety switch so that you can be more accurate with your work. You can connect it to your vacuum cleaner so as to experience dust-free operations. There are two ports available for you to connect your vacuum cleaner, hence, you can enjoy optimum flexibility.
This machine has a no-load disc speed of 1240 revolutions per minute, and a belt speed of 292 revolutions per minute. That is why you won’t have issues experiencing flawless effectiveness. It is a perfect machine for various activities like sanding work for model making, getting rid of large quantities of paint, modelling large surfaces, and so on.
3. Sealey Sm14 Belt/Disc Sander
Features
- Features:Bench mounting semi-portable belt and disc sander suitable for general woodworking applications
- Powerful induction motor with smooth, bearing-mounted drive pulleys gives quiet operation
- Sanding disc table tilts to 45� and is supplied with mitre gauge for accurate angle sanding
- Belt can be used tilted up to 90� from horizontal
- Specifications:Model No: SM14Belt Size: 915 x 100mmBelt Speed: 460mtr/minDisc Diameter: �150mmDisc Speed: 2950rpmTable Size: 225 x 160mmTable Tilt: 0-45�Motor Power: 500W - 230VDust Extraction Diameter: �35mmWeight: 22kgReplacement Sanding Belts: Model No: Grade:SM14/B060G 60GritSM14/B080G 80GritSM14/B100G 100GritReplacement Sanding Disc: Model No: Grade:SM14/D80G 80GritHeight: 372Width: 620Length: 330
This first-class machine from Sealey is your perfect choice if you are looking for a bench sander UK. It boasts of a powerful motor, which guarantees flawless performance at all times. The induction motor has bearing-mounted drive pulleys so that you will be able to meet your sanding goals.
You can use the belt vertically, horizontally, or at any angle of your choice. That is why you will be more flexible during operations to achieve target goals. You can tilt the disc table up to 45 degrees, and there is a mitre gauge for precise sanding.
You will like the compactness of this bench disc sander, hence, it won’t take up too much space in your workshop. Its lightweight is a plus, and that is why you won’t have issues moving it from one place to another. You can use it for various sanding jobs, especially if you care about optimum performance.
4. Clarke CS4-6E Belt and Disc Sander
1 used from £140.00
Features
- 370 watts, 230 V 6 inch (150 mm) diameter disc spins at 2850 RPM
- 4" x 36" (100 x 914mm) belt reclines and locks at any angle from 0 to 90°. Belt operates at 450m/min
- Safety features include fingers on belt, guard and complete disc locking system on/off switch
- Heavy duty cast iron construction for rigidity and long life - 60mm dust extraction port
- Supplied with removable sanding table (225 x 160mm) for use with two sanding belts or disc
The Clarke CS4-6E is an asset for any workshop. It is produced with a dynamic motor of 370 Watts meaning that you can be sure of meeting your set sanding goals. With its solid cast iron construction, no one can dispute the durability of this machine.
It features a dust extraction port, which measures 60 millimetres in diameter so that you can have a dust-free workspace. The sanding table that accompanies the package is removable, hence, you can be more flexible with its use.
Also, there are safety features on this machine such as full disc guarding, finger guard on the belt and locking on/off switch. The disc has a diameter of 150 millimetres with a speed of 2850 revolutions per minute. The belt has a speed of 450 metres per minute, which is perfect for most sanding jobs.
The belt is tiltable up to 90 degrees, and you can lock it at any angle between 0 and 90°. It weighs 17.7 kilograms so that you won’t have issues with its manipulation. You will like the compactness of this machine, hence, it won’t consume too much space in your workshop.
5. VonHaus Benchtop Belt & Disc Sander
Features
- STURDY CONSTRUCTION - With a cast iron base for stability and durability you can be confident when working. 100 x 915mm sanding belt; 150mm sanding disc
- EFFICIENT WORKING- With an integrated dust port (60mm Diameter) you will be able to keep a cleaner work area while improving sanding efficiency.
- REMOVABLE TABLE- Comes with a removable sanding table for use with either the sanding belt or disc.
- INDUCTION MOTOR - The powerful 370w induction motor with bearing-mounted drive pulleys ensures a smooth operation.
- Manufacturer 2 Year Warranty Included.
This machine from VonHaus boasts of a motor of 370 Watts, and that is why it is one of the most sought-after products in the market presently. The induction motor has bearing-mounted drive pulleys so that there can be smooth operations at all times.
It comes with a cast iron base so that it can be more stable and durable during operations. There is a removable table that you can use with either the disc or belt and that is why you can be more discretionary when working.
The sanding belt measures 100 by 915 millimetres, which is ideal for quick area coverage. The sanding disc has a diameter of 150 millimetres, hence, you won’t have issues meeting your set sanding goals.
What’s more, this machine has a dust port with a diameter of 60 millimetres for work area cleanliness. It is compactly designed so that it won’t use up too much space in your workshop. It is recommended for various sanding tasks for guaranteed results.
Features
- Multifunctional and handy, easy to use;
- Adjustable and multifunctional workbench;
- The powerful 375w 230v induction motor and cast iron base and rubber feet;
- This product is ideal for sanding large quantities of material;
- UK Standard plug, CE certificated;
The SwitZer Heavy Duty Sander is a multifunctional machine with rich features that will enhance your sanding jobs. It comes with a powerful motor, which has a rated power of 375 Watts. That is why you won’t have to look far for a machine that will give you optimum performance.
You can adjust the belt sander unit up to 90 degrees, from horizontal to a vertical position, so that you can carry out various tasks conveniently. Also, the sanding table is adjustable up to 45 degrees, hence, you can use it for all disc sanding jobs.
There is a dust-protected switch, which helps in promoting secure use. Its cast-iron base is a plus, and that is why you can rely on its lastingness. You will like its rubber feet, which make the machine to be more stable when you are using it. Hence, you will be able to apply the right amount of pressure required to get the best result.
You can use it to sand large quantities of material because it has a no-load speed of 1450 revolutions per minute. With its belt size standing at 100 by 914 millimetres, you will be able to finish sanding large pieces of wood in good time.
7. Draper 53005 300W 230V Belt and Disc Sander
1 used from £134.95
Features
- Size: 100mm x 150mm
- Wattage: 375W
- Voltage: 230V
- Fitted with a dust extraction outlet, cable and approved plug
- Robust construction provides excellent stability while minimising vibration
The Draper 53005 is an ideal machine for both vertical and horizontal sanding. With a 350-Watt motor, it offers optimum performance that will positively affect the quality of your jobs. Its arm is tiltable so that you can engage in various sanding procedures.
You will like its solid construction, which maximizes stability and reduces vibration. There is a dust-extraction outlet, which helps in making your work area to be clean. With its belt size standing at 915 by 100 millimetres, you can be sure of effective coverage of a large area within a short time.
Also, the sanding table measures 100 by 152 millimetres so that you will have enough space for your work. The disc has a diameter of 150 millimetres, hence, you can sand effectively in no time. The worktable and disc table are tiltable to 45 degrees, and this will enhance your flexibility.
With its disc speed standing at 2950 revolutions per minute, you can be sure of perfect handling of tough jobs. Its compactness is an outstanding feature, which helps in reducing the consumption of space in your workshop.
Features
- The powerful 500W motor and adjustable sanding belt allows you to easily sand projects.
- With 2 FREE additional disc sand papers and 2 FREE belt sand papers you can use a variety of sanding techniques.
- Ideal for DIY-enthusiasts and professional projects with its dependable industrial performance.
- The sturdy base allows the sander to be perfect for any sanding projects.
- FREE next working day UK mainland delivery when ordered by 2pm (excluding Scottish Highlands)
This machine boasts of a powerful motor of 500 Watts, which guarantees enhanced effectiveness. It features a strong base, which helps in making it stable during operations. You won’t mind its adjustable sanding belt, which makes it possible for you to change the angle at will.
Also, the compactness of this machine is a plus, and that is why you won’t have issues with moving it from one place to another. This 2-in-1 machine helps you to eliminate imperfections because you can use both disc and belt sandpapers to get a smooth finish.
Also, this combo tool enables you to change techniques with ease so that you will be able to get the best result. There are two extra disc sandpapers as well as two sandpaper belts at no additional cost. It comes with a no-load speed of 2950 revolutions per minute, meaning that you can effectively sand any surface.
The belt measures 100 by 914 millimetres, hence, you can be sure of undemanding coverage of large areas quickly. With its disc diameter standing at 150 millimetres, you won’t have issues getting the most satisfactory results. The table is tiltable to 45 degrees while the belt is tiltable to 90 degrees.
This machine from Hopopular comes with an adjustable belt, which is tiltable up to 90 degrees for vertical and horizontal sanding. You can tilt the work table up to 45 degrees so that you can engage in accurate angle sanding.
You will like its dust-proof switch, which helps in boosting its lastingness. With its motor power rated at 375 Watts, you can be sure of getting optimum effectiveness at all times.
Buying Tips & Guide
A combo tool like the belt & disc sander makes your sanding job more convenient and saves you space in the workshop. When shopping for this type of tool, you need to put so many things into consideration so that you won’t make the wrong choice. Here are some of them.
Motor Power: A power tool should have a powerful motor because it determines performance and efficiency. When searching for the best belt/disc sander, you need to consider the motor power of the machine you want to buy. This varies from one model to another but the higher the better.
For example, a 500-Watt machine will perform better than a 350-Watt one. Hence, you will use up too much effort with a powerful sander before getting the best result, especially when you are carrying out heavy sanding jobs.
Disc Diameter and Speed: The diameter and speed of the disc are other vital factors to consider. Disc diameters are usually between 5 and 10 inches, and your preference matters in this regard. However, it is important for you to note that machines with large discs will handle curves more perfectly, and give you enough room to operate.
Besides, the speed of the disc will determine how fast you complete your sanding jobs. Even though fast discs will help you to carry out your sanding tasks quickly, a slower disc will do delicate jobs perfectly.
Belt Size & Speed: The belt size of a sander determines the surface area you can sand at once. You should go for a machine with a large belt if you will be dealing with large pieces of wood frequently. On the other hand, if you are short of space in your workshop, you should go for a product with a small belt.
The speed of the belt determines the amount of material you can sand at once. That is why you need a sanding machine with a fast belt speed if you have so many pieces of wood to smooth.
Dust Collection: Dust collection is a very important factor to consider because a sanding job can be very dirty. An ideal sander will have a dust collector so that your working area will be clean, and you will not expose yourself to dust. You must ensure that the dust collector is large enough for your expectation so that you won’t be going for frequent evacuations.
Compactness: If you are struggling with space in your workshop, a compactly designed machine is your best bet. Since there are other tools that will be competing for space, the compactness of a machine is a plus, but this should not reduce its performance. Also, it will make space-saving storage a reality if you have any course to store it.
Frequently Asked Questions
What is the difference between a belt sander and a disc sander?
A belt sander has a long straight surface, and it works perfectly for flattening faces as well as edges, shaping contours, and flushing inside curves. A disc sander is ideal for precise edge works such as trueing outside curves and fitting mitre joints.
How long does a belt sander belt last?
This depends on so many factors like the quality of the product, your maintenance culture, exposure to extreme temperature as well as humidity, and so on. Ideally, your machine should be able to serve you for between 12 and 18 months provided you take care of it properly.
What is a bench sander used for?
A bench sander is also referred to as the stationary sander, and it is a very powerful sanding tool. It is used for shaping wood, and you can also use it to sharpen tools perfectly.
How much does a Belt & Disc sander cost?
This depends on the brand and model you go for. With a minimum of £80, you should be able to get a good product. The features of the product you want to purchase affect its listing price.
Summary
No matter who you are, whether a professional woodworker or a DIYer, you will feel the pinch for the best belt and disc sander.
We hope our belt and disc sander reviews, as well as buyer’s guide, will be of great help to you so that you won’t have issues getting the best result.
